CCL256i2 | Discontinued Models | Products

2 megapixel 21.3" color display

CCL256i2

High-Luminance 2MP color display for diagnostic imaging
realizes advanced grayscale display.

With high luminance and high contrast, and an integrated color calibration function, our CCL256i2 delivers highly accurate color reproduction faithful to the DICOM GSDF. The CCL256i2 includes a luminance compensation feature for edge to edge consistency, is fully configurable for multi-display applications, and comes standard with hardware-based pivot functionality for fast image drawing in portrait orientation.

Luminance stabilizing system λ-Sentinel II

λ-Sentinel II consists of a luminance sensor and luminance control circuit. The luminance sensor, integrated into the front bezel, consistently monitors and accurately stabilizes luminance on the screen by rapidly communicating with the backlight sensor.
In addition, a build-in luminance sensor provided with i2 models enables even simpler calibration without attaching the calibration sensor.

Remote grayscale check and remote calibration functions

Conformance testing to DICOM GSDF and calibration can be remotely accomplished. These features minimize the burden on display administrators.

* An optional PM Medivisor software is required.

Next Generation Interface - DisplayPort

In addition to a DVI port, each i2 series display includes a new digital display interface, "DisplayPort". When using the DisplayPort, up to 1024 or 10-bit shades of gray are simultaneously displayed. This enables smooth and accurate display of subtle dierences in shades of gray. Additionally, 1073.74 million colors (10-bit in each R, G, B) are simultaneously displayed on our color model.
*Customized viewer software and graphics card are required to
display 10-bit images.

Special AR Coating for Film-like Black and Improved Sharpness

TOTOKU's new special AR coating technology addresses properties of focus, noise reduction, contrast, and viewing angle achieving film-like black and accurate reproduction of images. (Patent pending)

Uniformity equalizer

Is built in to achieve highly accurate luminance and color uniformity across the screen. Luminance and color unevenness are minimized in the final tune-up prior to shipping.
* Images shown are for illustrative purposes only.

High luminance, high quality LCD panel

950 cd/m² and contrast ratio of 900:1. Due to its wide, dynamic range, high quality grayscale can also be achieved on this color display, providing versatility for multi-modality workstations.

Accurate color and grayscale reproduction compliant with DICOM Part 14

By calibrating color temperature, luminance, and gamma characteristics, reproduction of colors faithful to the original and smooth display of grayscale are possible.

Built-in 16-bit LUT (look up table) for accurate grayscale reproduction

The built-in LUT selects the most appropriate 256 shades of gray (8bit) out of 16bit shades to realize finer and smoother grayscale.

Hardware pivot function for fast drawing in portrait on landscape orientation

Stress-free operation is made possible by fast drawing speed for on-the-fly change to portrait

User-selectable display congurations

Luminance/gamma settings are selectable from three preset levels according to the needs. User-selectable congurations enable stress free operations without specialized settings.

OSD Information Display

At your ngertips, you can view current display status and information, including actual measurement of luminance, calibration settings, total operating hours as well as model name and serial number.

LED indicator to inform of current status

A glance at the LED indicator tells you the display's current operating status.

Display Quality Control

The Medivisor Series is a series of software to collectively support display quality control from acceptance and periodic constancy testing to constant monitoring, to calibration.

Ecological Technology EConsidering the Global Environment

Totoku is committed to providing high performance display systems that are ecological and environmentally friendly. We strive to create green IT initiatives and be a part of building a clean energy future. In eort to achieve this, we have incorporated new power-saving features in our i2 series displays.
Our advanced power saving function dims the backlight as the screensaver activates, thereby reducing power consumption and preventing unnecessary backlight deterioration, resulting in a longer lasting display. Our internal power supply system includes a newly improved power save mode, which allows the display to enter standby mode with less than 2 watts of energy consumption.

*Optional software Calibration Kit is required to set up the Advanced Power Savings feature.

Enhanced convenience with utility software

Advanced power saving*

The backlight dims as the screensaver starts, reducing power consumption and preventing unnecessary deterioration of the backlight.
* This feature may not be available, depending on the specifications of the graphics card used.

Gamma check

18 points of luminance values are measured and plotted into a graph.

*Optional software Calibration Kit is required to set up the Advanced Power Savings feature and Gamma check feature.

Worldwide medical safety standards

TOTOKU medical image displays comply with various stringent worldwide medical standards. They ensure safety and reliability required for use in medical facilities.

About medical safety standards

Specifications

Model Name		CCL256i2 /AR (Special AR Coating), CCL256i2 /F (Protective Filter)
LCD	Technology	21.3-inch, Color, TFT active matrix IPS Technology
	Display Area	432mm x 324mm
	Pixel Pitch	0.270mm x 0.270mm
	Contrast Ratio	900:1 (typ)
	Maximum Luminance	950cd/m² (typ), (factory-set to 410cd/m² and 300cd/m²)
	Viewing Angle	170° horizontal and vertical (typ)
Visual Performance	Available Resolution	640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1600 x 1200 (UXGA)
Visual Performance	Color Display	16.77million colors out of 68 billion color 1073.74 million colors (DisplayPort 10bit input)
Input Signal	Input Sync Signal	DVI-D (DVI 1.0 compliant), DisplayPort (DisplayPort 1.1a compliant)
Input Signal	Plug and Play	DDC2B compliant
Input Power Supply	Input	100V-240V (±10%) 50/60Hz
Input Power Supply	Maximum Power Consumption	120W (typ), (with power management feature)
Features	Calibration Control	Luminance, Gamma, Color temp., Capability to save 3 sets of LUT settings (A n optional calibration kit is required.)
	OSD Information Display	Model name, Serial No., Total operating time, Calibration settings (Operating time from Last Calibration, Luminance, Gamma, etc.), Current luminance, etc.
	USB Hub	USB Rev. 2.0 compliant, Self-powered USB upstream connector (x1), USB downstream connector (x2)
	Other Features	Uniformity Correction, Hardware Pivot, LED indicator, Advanced power saving, Configurations switching function
Standards		UL60601-1, CSA C22.2 No. 601.1, MDD/CE, FCC-B, VCCI-B, RoHS, FDA510(k)
Physical Characteristics	Dimensions (WxHxD)	Landscape: 474mm x 468.4/529.9mm x 220mm Portrait: 367mm x 521.9/583.4mm x 220mm
	Weight	Net: approx. 12kg
	Tilt Stand	Tilt, swivel, landscape/portrait rotation
	Mount	100mm VESA compliant
	Security Slot	On the back of the panel and the tilt stand
Accessories		Power cord (3P), DVI cable, USB cable, Operation manual *Cleaning kit (Special AR coating model only)

Dimensions

Features