Luminance stabilizing system λ-Sentinel II

λ-Sentinel II consists of a luminance sensor and luminance control circuit. The luminance sensor, integrated into the front bezel, consistently monitors and accurately stabilizes luminance on the screen by rapidly communicating with the backlight sensor.
In addition, a build-in luminance sensor provided with i2 models enables even simpler calibration without attaching the calibration sensor.

Remote grayscale check and remote calibration functions

Conformance testing to DICOM GSDF and calibration can be remotely accomplished. These features minimize the burden on display administrators.

* An optional PM Medivisor software is required.

Next Generation Interface - DisplayPort

In addition to a DVI port, each i2 series display includes a new digital display interface, "DisplayPort". When using the DisplayPort, up to 1024 or 10-bit shades of gray are simultaneously displayed. This enables smooth and accurate display of subtle dierences in shades of gray. Additionally, 1073.74 million colors (10-bit in each R, G, B) are simultaneously displayed on our color model.
*Customized viewer software and graphics card are required to
display 10-bit images.

Special AR Coating for Film-like Black and Improved Sharpness

TOTOKU's new special AR coating technology addresses properties of focus, noise reduction, contrast, and viewing angle achieving film-like black and accurate reproduction of images. (Patent pending)

Uniformity equalizer

Is built in to achieve highly accurate luminance and color uniformity across the screen. Luminance and color unevenness are minimized in the final tune-up prior to shipping.
* Images shown are for illustrative purposes only.

High luminance, high quality LCD panel

800 cd/m² and contrast ratio of 750:1. Due to its wide, dynamic range, high quality grayscale can also be achieved on this color display, providing versatility for multi-modality workstations.

Accurate color and grayscale reproduction compliant with DICOM Part 14

By calibrating color temperature, luminance, and gamma characteristics, reproduction of colors faithful to the original and smooth display of grayscale are possible.

Built-in 16-bit LUT (look up table) for accurate grayscale reproduction

The built-in LUT selects the most appropriate 256 shades of gray (8bit) out of 16bit shades to realize finer and smoother grayscale.

Hardware pivot function for fast drawing in portrait on landscape orientation

Stress-free operation is made possible by fast drawing speed for on-the-fly change to portrait.

 

Dual Link input

Provides smooth display of motion pictures.

User-selectable display configurations

Luminance/gamma settings are selectable from three preset levels according to the needs. User-selectable configurations enable stress free operations without specialized settings.

OSD Information Display

At your ngertips, you can view current display status and information, including actual measurement of luminance, calibration settings, total operating hours as well as model name and serial number.

LED indicator to inform of current status

A glance at the LED indicator tells you the display's current operating status.

Enhanced convenience with utility software

Advanced power saving*

The backlight dims as the screensaver starts, reducing power consumption and preventing unnecessary deterioration of the backlight.
* This feature may not be available, depending on the specifications of the graphics card used.

Gamma check

18 points of luminance values are measured and plotted into a graph.

*Optional software Calibration Kit is required to set up the Advanced Power Savings feature and Gamma check feature.

 

Worldwide medical safety standards

TOTOKU medical image displays comply with various stringent worldwide medical standards. They ensure safety and reliability required for use in medical facilities.

About medical safety standards

Specifications

Model Name		CCL356i2 /AR (Special AR Coating), CCL356i2 /F (Protective Filter)
LCD	Technology	21.3-inch, Color, TFT active matrix IPS Technology
	Display Area	433.152mm x 324.864mm
	Pixel Pitch	0.2115mm x 0.2115mm
	Contrast Ratio	750:1 (typ)
	Maximum Luminance	800cd/m² (typ), (factory-set to 410cd/m² and 300cd/m²)
	Viewing Angle	170° horizontal and vertical (typ)
Visual Performance	Recommended Resolution	1536 x 2048, 2048 x 1536 (QXGA)
	Color Display	16.77million colors out of 68 billion color 1073.74 million colors (DisplayPort 10bit input)
Input Signal	Input Sync Signal	DVI-D (DVI 1.0 compliant), DisplayPort (DisplayPort 1.1a compliant)
	Plug and Play	DDC2B compliant
Input Power Supply	Input	Built-in AC power supply, 100V-240V (±10%) 50/60Hz
	Maximum Power Consumption	120W (typ), (with power management feature)
Features	Calibration Control	Luminance, Gamma, Color temp., Capability to save 3 sets of LUT settings (A n optional calibration kit is required.)
	OSD Information Display	Model name, Serial No., Total operating time, Calibration settings (Operating time from Last Calibration, Luminance, Gamma, etc.), Current luminance, Ambient brightness, etc.
	USB Hub	USB Rev. 2.0 compliant, Self-powered USB upstream connector (x1), USB downstream connector (x2)
	Other Features	Luminance and Uniformity Correction, Hardware Pivot, LED indicator, Advanced power saving, Configuration switching function
Standards		UL60601-1, CSA C22.2 No. 601.1, MDD/CE, FCC-B, VCCI-B, RoHS,CCC, FDA510(k)
Physical Characteristics	Dimensions (WxHxD)	Landscape: 474mm x 471.4/532.9mm x 220mm Portrait: 367mm x 524.9/586.4mm x 220mm
	Weight	Net: approx. 12kg
	Tilt Stand	Tilt, swivel, landscape/portrait rotation
	Mount	100mm VESA compliant
	Security Slot	On the back of the panel and the tilt stand
Accessories		Power cord (3P), DVI cable, USB cable, Operation manual *Cleaning kit (Special AR coating model only)

Dimensions

Graphics cards

LV Series

Display performance monitoring software

PM Medivisor

Acceptance and constancy testing software

QA Medivisor

Calibration software

Medivisor Color