CCL354i2 | Discontinued Models | Products

3 Megapixel 21.3" Color LCD

CCL354i2

High-Luminance 3MP color display for diagnostic imaging
realizes advanced grayscale display

With high luminance and high contrast, and an integrated color calibration function, our CCL354i2 delivers highly accurate color reproduction faithful to the DICOM GSDF. The CCL354i2 includes a luminance compensation feature for edge to edge consistency, is fully configurable for multi-display applications, and comes standard with hardware-based pivot functionality for fast image drawing in portrait orientation.

New luminance stabilizing system λ-Sentinel II

λ-Sentinel II consists of a luminance sensor and luminance control circuit. The luminance sensor, integrated into the front bezel, consistently monitors and accurately stabilizes luminance on the screen by rapidly communicating with the backlight sensor.
In addition, a build-in luminance sensor provided with i2 models enables even simpler calibration without attaching the calibration sensor.

Remote grayscale check and remote calibration functions

Conformance testing to DICOM GSDF and calibration can be remotely accomplished. These features minimize the burden on display administrators.

* An optional PM Medivisor software is required.

Luminance equalizer λ-Uniformity Congruence

Is built in to achieve highly accurate luminance uniformity across the screen. Luminance unevenness is minimized in the final tune-up prior to shipping.
* Images shown are for illustrative purposes only.

High luminance, high quality LCD panel

800 cd/m² and contrast ratio of 750:1. Due to its wide, dynamic range, high quality grayscale can also be achieved on this color display, providing versatility for multi-modality workstations.

Accurate color and grayscale reproduction compliant with DICOM Part 14

By calibrating color temperature, luminance, and gamma characteristics, reproduction of colors faithful to the original and smooth display of grayscale are possible.

Built-in 16-bit LUT (look up table) for accurate grayscale reproduction

The built-in LUT selects the most appropriate 256 shades of gray (8bit) out of 16bit shades to realize finer and smoother grayscale.

Hardware pivot function for fast drawing in portrait orientation

Stress-free operation is made possible by fast drawing speed for on-the-fly change to portrait

Dual Link input

provides smooth display of motion pictures.

OSD Information Display

Such information as the display model, total operating time, actual measurement of luminance, and calibration settings can be checked on screen.

LED indicator to inform of current status

A glance at the LED indicator tells you the display's current operating status.

Enhanced convenience with utility software :

Advanced power saving*

The backlight dims as the screensaver starts, reducing power consumption and preventing unnecessary deterioration of the backlight.
* This feature may not be available, depending on the specifications of the graphics card used.

Gamma check

18 points of luminance values are measured and plotted into a graph.

Ambient light and display luminance measurement

The built-in sensors measure display luminance and ambient illuminance.

Worldwide medical safety standards

This display is certified under various medical safety standards that are much more demanding than those for general-purpose IT equipment.

About medical safety standards

Specifications

Model Name		CCL354i2
LCD	Technology	21.3-inch, Color, TFT active matrix
	Display Area	433.152mm x 324.864mm
	Pixel Pitch	0.2115mm x 0.2115mm
	Contrast Ratio	750:1 (typ)
	Maximum Luminance	800cd/m² (typ), (calibrated to 410cd/m² and 300cd/m² by factory default)
	Viewing Angle	170° horizontal and vertical (typ)
Visual Performance	Available Resolution	USTEXT, 640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 2048 x 1536 (QXGA)
Visual Performance	Color Display	16.77million out of 68 billion
Input Signal	Input Sync Signal	DVI 1.0 compliant
Input Signal	Plug and Play	DDC2B compliant
Input Power Supply	Input	AC Adapter 100V-240V (±10%) 50/60Hz
Input Power Supply	Maximum Power Consumption	120W (typ), (with power management feature)
Features	Calibration Control	Luminance, Gamma, Color temp., Capability to save 3 sets of LUT settings (A calibration kit is required.)
	OSD Information Display	Model name, Serial No., Total operating time, Calibration settings (Operating time since the last calibration, Luminance, Gamma, Color temp., etc.), Current luminance, etc.
	USB Hub	USB Rev. 2.0 compliant, Self-powered USB upstream connector (x1), USB downstream connector (x2)
	Other Features	Luminance Uniformity Correction, Hardware pivot, LED indicator
Standards		UL60601-1, CSA C22.2 No. 601.1, MDD/CE, FCC-B, VCCI-B, FDA510(k)
Physical Characteristics	Dimensions (WxHxD)	Landscape: 474mm x 468.4/529.9mm x 220mm Portrait: 367mm x 521.9/583.4mm x 220mm
	Weight	Approx. 11.5kg (Approx. 7.3kg without tilt stand)
	Tilt Stand	Tilt, swivel, landscape/portrait rotation
	Mount	100mm VESA compliant
	Security Slot	On the back of the panel and the tilt stand
	Protective Filter	Antireflection-coated
Accessories		AC adapter, 3P power cord, DVI cable, USB cable, User manual

Dimensions

Features