High resolution of 6M sub-pixels realized by ISD
technology

Faithful Reproduction of Image Details
While a pixel pitch of 2MP display is 270µm, MS21i2 achieves 90µm in sub-pixel chain direction by newly developed ISD technology to realize excellent depiction of image details.

Advanced Image Quality with Less Degradation

To display an overall image whose native resolution is higher than the monitor is able to reproduce, the image is converted to a lower resolution image with a certain amount of data loss.
The MS21i2 with high resolution offers excellent image reproduction, faithful to the original captured by the modality device with less image degradation.

ISD (Independent Sub-pixel Drive) Technology
Driven by each sub-pixel value corresponding to detailed information recorded in an original image, three times resolution enhancement is achieved. (Patent pending) In addition, up to 1276 shades of gray are now simultaneously displayable by the upgraded ISD technology.

*Customized viewer software is required to display images with enhanced resolution by the ISD technology.

Special AR Coating for Film-like Black and Improved Sharpness

TOTOKU's new special AR coating technology addresses properties of focus, noise reduction, contrast, and viewing angle achieving film-like black and accurate reproduction of images. (Patent pending)

Simultaneous display of 1276 shades of gray

Realizes smoother grayscale display required for medical image displays. 

New luminance stabilizing system λ-Sentinel II

λ-Sentinel II consists of a luminance sensor and luminance control circuit. The luminance sensor, integrated into the front bezel, consistently monitors and accurately stabilizes luminance on the screen by rapidly communicating with the backlight sensor.
In addition, a build-in luminance sensor provided with i2 models enables even simpler calibration without attaching the calibration sensor.

Remote grayscale check and remote calibration functions

Conformance testing to DICOM GSDF and calibration can be remotely accomplished. These features minimize the burden on display administrators.

* Optional PM Medivisor software is required.

Luminance equalizer λ-Uniformity Congruence

Is built in to achieve highly accurate luminance uniformity across the screen. Luminance unevenness is minimized in the final tune-up prior to shipping.
* Images shown are for illustrative purposes only.

Calibration function

Calibrates luminance and gamma to enable smooth grayscale display that is faithful to DICOM GSDF.
* Optional calibration kit is required.

Hardware pivot function for fast drawing in portrait on landscape orientation

Stress-free operation is made possible by fast drawing speed for on-the-fly change to portrait.

OSD Information Display

With a push of a button, the display's current status can be checked such as the display model, total operating time, actual measurement of luminance, and calibration settings.

LED indicator to inform of current status

A glance at the LED indicator tells you the display's current operating status.

Enhanced convenience with utility software:

Advanced power saving*

The backlight dims as the screensaver starts, reducing power consumption and preventing unnecessary deterioration of the backlight.
* This feature may not be available, depending on the specifications of the graphics card used.

Gamma check

18 points of luminance values are measured and plotted into a graph.

Ambient light and display luminance measurement

The built-in sensors measure display luminance and ambient illuminance.

Pairing service to match colors of two displays (Optional)

 

 

Worldwide medical safety standards

This display is certified under various medical safety standards that are much more demanding than those for general-purpose IT equipment.

Specifications

Model Name		MS21i2
LCD Panel	Technology	21.3-inch, Monochrome, TFT active matrix IPS Technology
	Display Area	432mm x 324mm
	Pixel Pitch	0.270mm x 0.270mm
	Contrast Ratio	700:1 (typ)
	Maximum Luminance	1800cd/m² (typ), (calibrated to 410cd/m²)
	Viewing Angle	170° horizontal and vertical (typ)
Visual Performance	Available Resolution	USTEXT, 640X480(VGA), 800X600(SVGA), 1024X768(XGA), 1280X1024(SXGA), 4800 (1600 X 3) sub-pixel X 1200pixel *MS21i2 supports 6M-ISD and 2M-normal modes. To use MS21i2 in 6M-ISD mode, customized viewer software is required.
	Grayscale	3061 shades of gray�?to 256 shades of gray Simultaneous display of 1276 shades of gray is possible with the customized viewer.
Input Signal	Input Sync Signal	DVI 1.0 compliant
	Plug and Play	DDC2B compliant
Input Power Supply	Input	AC Adapter 100V-240V (±10%) 50/60Hz
	Maximum Power Consumption	85W (typ), (with power management feature)
Features	Calibration Control	Luminance, Gamma, Capability of saving 3 sets of LUT settings (An optional calibration kit is required.)
	OSD Information Display	Model name, Serial No., Total operating time, Calibration settings (Operating time from Last Calibration, Luminance, Gamma, etc.), Current luminance, etc.
	USB Hub	USB Rev. 2.0 compliant, Self-powered USB upstream connector (x1), USB downstream connector (x2)
	Other Features	Luminance Uniformity Correction Function, Hardware Pivot function, LED indicator
Standards		UL60601-1, CSA C22.2 No. 601.1, MDD/CE, FDA510(k), FCC-B, VCCI-B
Physical Characteristics	Dimensions (WxHxD)	Landscape : 474.0 (W) X 468.4 / 529.9 (H) X 220.0 (D) mm Portrait : 367.0 (W) X 521.9 / 583.4 (H) X 220.0 (D) mm
	Weight	Net: approx. 10.8kg, Without tiltstand: approx. 6.6kg
	Tilt Stand	Tilt, Swivel, Portrait / Landscape
	Mount	100mm VESA compliant
	Security Slot	On the back of the panel and the tilt stand
	LCD surface treatment	Special AR coating
Accessories		AC adapter, Power cord (3P), DVI cable, USB cable, User manual

Dimensions

Graphics cards

LV Series

Display performance monitoring software

PM Medivisor

Software for acceptance and constancy testing

QA Medivisor

Calibration software

Medivisor

Pairing service to match colors of two displays

Details